Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | Licloud |
Model Number : | JGFM |
Certification : | CE |
Price : | Negotiable |
Payment Terms : | T/T, Western Union, L/C |
Supply Ability : | 10000 pcs per week |
Delivery Time : | 15-20 working days |
2Volt 800Ah Deep Cycle Gel Battery Full Capacity Long Service Life
Description
Deep Cycle Gel battery is a battery in which the electrolyte is in
gel state, which belongs to a development classification of
lead-acid battery, the method is to add gelling agent to sulfuric
acid, so that the sulfuric acid electrolyte becomes gel state. Gel
battery with a smaller industrial cost, manufacturing a higher
quality battery, its discharge curve is straight, the inflection
point is high, its energy and power than conventional lead-acid
battery is more than 20%. Lead-acid batteries are characterized by
electrolyte that does not leak out of the battery terminals or
casing during normal operation. The special absorption partition
keeps the acid inside and there is no free acid inside the battery,
so the battery can be placed in any position. Due to the unique gas
compound system that converts the generated gas into water, there
is no need to add water during the use of the battery.
Model | Nominal Voltage | Capacity C10 | Weight | Dimension | ||
Height | Length | Width | ||||
V | Ah | kg | mm | mm | mm | |
JGFM 100-2 | 2 | 100 | 7.2 | 205 | 172 | 102 |
JGFM 150-2 | 2 | 150 | 9 | 320 | 172 | 102 |
JGFM 200-2 | 2 | 200 | 13 | 329 | 171 | 111 |
JGFM 300-2 | 2 | 300 | 18 | 330 | 171 | 151 |
JGFM 400-2 | 2 | 400 | 25 | 329 | 211 | 176 |
JGFM 500-2 | 2 | 500 | 28 | 331 | 241 | 172 |
JGFM 600-2 | 2 | 600 | 35 | 331 | 301 | 175 |
JGFM 800-2 | 2 | 800 | 48 | 333 | 410 | 175 |
JGFM 1000-2 | 2 | 1000 | 62 | 329 | 470 | 175 |
JGFM 1500-2 | 2 | 1500 | 96 | 343 | 401 | 351 |
JGFM 2000-2 | 2 | 2000 | 123 | 343 | 491 | 351 |
JGFM 3000-2 | 2 | 3000 | 180 | 341 | 712 | 353 |
Product Features
Advantages
Application
Power, nuclear power station backup power supply
Compliant standards
Use of Deep Cycle Gel Battery
Discharge: 1) 12V battery charging and discharging, 250Ah battery
with a current of no more than 25A for 10 hours to discharge until
the battery termination voltage of 10.8V or more, do not over
discharge.
2) During the discharge process, measure and record the battery
voltage, discharge current and ambient temperature every hour, pay
attention to the change of ammeter and battery voltage at any time,
when the voltage drops to about 12.0V, change to half an hour test.
When the measured voltage is 10.8v, stop discharging, open the
discharge switch, the discharge is over. And record the discharge
termination time, battery voltage, ambient temperature.
3) After discharge, the battery should be recharged in time, to
prevent acidification of the poles, the discharge-charging interval
should not exceed 8 hours, so it must be balanced within 8 hours to
replenish the electricity, the average charging voltage is set to
14.1V (the average of the measured value of the positive and
negative terminals of the battery at 25℃), and the maximum charging
current is set to 0.25C10A. The battery will run normally with the
float charging voltage of 13.5V. Battery 13.5V.
Temperature compensation: The above current and voltage setting values are the standard values when the ambient temperature is 25℃, if the gel battery working temperature is beyond the range of 20℃-30℃, the floating charge and average charge voltage should be corrected accordingly, the corrected voltage is, that is, for every 1℃ increase in temperature, the floating charge voltage is reduced by 5.5mV, and for every 1℃ decrease in temperature, the floating charge voltage is increased by 5.5mV.
![]() |